Torquepedia
GL 1800 Goldwing Tour

GL 1800 Goldwing Tour

Honda

Engine typeLiquid-cooled 4-stroke 24 valve SOHC flat-6
Engine displacement1,833 cc
Engine valves per cylinder4
Engine bore stroke73mm x 73mm / 2.87 in x 2.87 in
Engine compression ratio10.5:1
Engine max power output93 kW / 124.7 hp @ 5,500 rpm
Engine max torque170 Nm / 125.4 lb-ft @ 4,500 rpm
Engine oil capacity4.4 litres / 1.16 gal (MT), 5.6 litres / 1.48 gal (DCT)
Engine noise levelLwot 76 dB, Lurban 69 dB
Engine co2 emissions127 g/km
Fuel system carburationPGM-FI electronic fuel injection
Fuel system throttle bore50 mm / 1.97 in
Fuel system air cleanerViscous, cartridge type paper filter
Fuel system fuel tank capacity21.1 litres / 5.57 gal
Fuel system fuel consumption5.5 litres/100km / 42.77 mpg
Electrical starterIntegrated Starter Generator system
Electrical battery capacity12V/20AH
Electrical acg power generation capacity12V/120A
Drivetrain clutch type mtHydraulic, wet, multiplate with coil springs, assist slipper cam
Drivetrain clutch type dctHydraulic, wet, multiplate with oil pressure
Drivetrain transmission type6 speed MT (including overdrive. Plus electric reverse), 7-speed forward and reverse DCT
Drivetrain primary reduction1.795 (79/44)
Drivetrain gear ratios dct1st: 2.167, 2nd: 1.696, 3rd: 1.304, 4th: 1.038, 5th: 0.821, 6th: 0.667, 7th: 0.522, Rev: 1.190
Drivetrain gear ratios mt1st: 2.200, 2nd: 1.417, 3rd: 1.036, 4th: 0.821, 5th: 0.667, 6th: 0.522
Drivetrain final reduction engine side0.972
Drivetrain final reduction rear wheel side2.615
Drivetrain final driveEnclosed shaft
Frame typeAluminum die-cast, twin tube
Chassis dimensionsL: 2,615mm / 102.95 in, W: DCT 905mm / 35.63 in, MT 925mm / 36.42 in, H: 1,430mm / 56.3 in
Chassis wheelbase1,695mm / 66.73 in
Chassis caster angle30.5°
Chassis trail109mm / 4.29 in
Chassis turning radius3.4m / 11.15 ft
Chassis seat height745mm / 29.33 in
Chassis ground clearance130mm / 5.12 in
Chassis kerb weightMT: 385 kg / 848.8 lbs, DCT with Air Bag: 390 kg / 859.8 lbs
Suspension type frontDouble Wishbone
Suspension type rearPro Link
Wheels type front130/70R 18
Wheels type rear200/55R 16
Wheels rim size front18 x MT3.5
Wheels rim size rear16 x MT6.0
Brakes system typeElectronically controlled combined ABS system
Brakes type front320mm x 4.5mm dual hydraulic disc with 6-piston calliper, floating rotors and sintered metal pads
Brakes type rear316mm x 11mm ventilated disc with 3-piston calliper and sintered metal pads

Related models:

Picture of the author

GL 1800 Goldwing[2024]

Honda

Blog